Fluid optimization
Produced water, chemistry and hauling as one program.
Water handling is where oil and gas, and heavy oil in particular, concentrates operating cost — these systems move far more water than oil. We measure the system, treat it with the right chemistry at the right injection point, and move what has to move — then report what changed.
Water disposal injection facility
Produced water handling
High-pressure cleaning
Chemical delivery
Service lines
Produced-water optimization
Assess separation and treating performance, then correct the chemistry, the equipment or both.
Chemical supply & injection
Product supply plus injection pumps, tanks and dose control installed and serviced.
Pressure cleaning
High-pressure wash for equipment, vessels, tanks and facility surfaces.
Fluid hauling
Vacuum trucks and fluid transport for produced water, slop and disposal runs.
Tank & vessel cleaning
Sludge removal, confined-space entry cleaning and return-to-service support.
Paraffin & deposition control
Hot work, mechanical cutting and chemical treatment programs for wax-limited heavy-oil, SAGD and cold-flow wells.
Chemical programs
Treated as an engineering problem.
A drum delivered on schedule is not a program. These are the four questions we answer before a product is recommended.
01
Baseline the system
Samples, rates, temperatures and failure history before anything is recommended.
02
Match the chemistry
Product selection against the actual fluid, not a regional default.
03
Fix the injection
Right point, right rate, right equipment. Most program failures are mechanical.
04
Report the delta
Measured change against baseline, so the spend is defensible internally.
Automated chemical injection
Mobile chemical injection
Water system costing more than it should?
Send us the rates, the samples and the failure history. We will baseline it before recommending a thing.
Request a baseline